Release time:

2022-07-18

Most of the grinding workshops are made of color steel plates and semi-enclosed grinding rooms. Workers operate in the room. Due to the effect of the exhaust fan of the ventilation and dust removal system, the room is in a negative pressure state. The dust generated during polishing is effectively restricted in the polishing room, collected by the dust removal unit, and discharged after being treated by the filter cartridge dust collector. It can effectively control dust leakage, protect the production environment, and discharge to meet relevant standards. The filter cartridge filter element is used in the design of dust removal in the polishing workshop. It should be considered that the polishing table is generally used indoors, with a small floor area but a large dust removal area. The key is to facilitate dust removal. In the design, it should be considered to reduce the dust removal time and times of manual disassembly and assembly of the filter cartridge by workers. If cloth bags are used in the design of dust removal equipment in the polishing workshop, it must be considered that the polishing table is in a closed room, the size of the indoor area and the height of the workshop must be considered, and then the dust removal area must be large, and it must be convenient to remove dust at critical moments, and it can automatically remove dust. The installation position of the cloth bag dust collector must also consider the safe position for workers to replace the cloth bags and skeleton, therefore, this pulse bag filter is installed in the grinding workshop, which requires a lot of space.