Release time:

2022-07-18

Bag dust collector before the boot: 1. Check whether the inlet is sealed in place 2. Check whether the ash discharge device of ash hopper can operate normally 3. Check the water in the water separation filter 4. Ensure that all inspection holes of the dust collector are closed 5. Open the flue gas inlet and outlet valves of the bag filter; 6. Turn on the blowback air conditioner 7. Start the automatic blowback system, follow up and check whether the pressure and electromagnetic frequency of the high-pressure gas storage bag are normal. bag dust collector boot when: 1. When starting up, first turn on the compressed air to the storage pipe, turn on, control the power supply, and start the ash discharge device. If there are other equipment in the system, the interlock control should be controlled according to the process requirements. When the bag dust collector is working 2. When the dust collector is working normally, the ash discharge device cannot stop working.